DMM Product Recall
September 14, 2015

DMM are issuing a product recall, subject to user inspection. This document details the products that are affected by the recall and contains instructions to identify whether or not an affected product should be returned to DMM.

In a small percentage of carabiners the interaction between the internal coil spring (which gives the gate its closing action) and the gate pusher (the component that holds the spring against the carabiner body) may cause the gate pusher to displace, potentially preventing the gate from closing or the mechanism from locking completely.

This recall encompasses all of the products in the table above. All models, all colors and all gate types are potentially affected by the dysfunction:

With the following serial numbers (these run sequentially):
  • 2014 Production: 14138xxxxX to 14365xxxxX
  • 2015 Production: 15001xxxxX to 15254xxxxX
The serial number can be found on the spine of the carabiner.

If your carabiners meet the above criteria please carry out the user inspection as detailed below.

Gate Pusher User Inspection
Please use the following information to identify the type of gate pusher that is installed in your carabiner and subsequently whether or not your carabiner is affected by this recall.